Time relay

 One command timers are designed for issuing commands in the chain of control circuits through the relay contacts after working set time delay on the set algorithm operation.
 Readout of the set time starts at filing Upow, after which the relay switches. Disabling the relay occurs when you turn off Upow.

Circuit RVC

 Cyclic time relays are used for switching electric circuits in a cyclic mode with preset time delay (pause and pulse).
 Cyclic switching on and off relay. At power a cycle start from  "pause"/ "pulse".


 Three switch time relay with pre-established time t1, t2 and t3 per chain, designed for switching electric circuits (up to three independent circuits K1, K2, K3). It is used in automation schemes as a completing part.
 When filing Upow relay all three channels are included, starts counting the set time. At the end of the counting time relay is off. The time delay is set for each channel individually. The range is set the same for all.

 Starting time switch designed to reduce the starting current of the induction motor due to the switching of the motor windings after starting with a "star" to "delta", as well as for starting the engine diesel (benzo) generator and issuing commands in the case of startup failure.


You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.